HomeMy WebLinkAboutFee Proposal_MTGL Fee SchedulePROFESSIONAL SERVICES UNIT RATE LAB TESTING ‐ CONCRETE UNIT RATE
Staff Engineer / Geologist HR $ 115.00 C39 Compressive Strength ‐ Concrete Cylinders (6" x 12") EACH $ 35.00
Project Manager/Engineer/Geologist HR $ 135.00 C39 Compressive Strength ‐ Cores (6" Max. Diameter)EACH $ 55.00
Principal Engineer/Geologist HR $ 175.00 C78 Flexural Strength ‐ Beams (6" x 6")EACH $ 60.00
Draftsperson HR $ 70.00 C157 Concrete Shrinkage (Set of 3)SET $ 350.00
Administrative (Per Monthly Invoice)5%C174 Handling Charge ‐ Cylinders Not Broken/Hold EACH $ 65.00
Project Setup Fee $ 200.00 C192 Concrete Trial Batch w/ Lab Testing EACH $ 1,100.00
Certified Payroll (Per Pay Period) $ 95.00 C469 Modulus of Elasticity EACH $ 150.00
C495 Comp. Strength ‐ Lightweight Concrete Fill EACH $ 45.00
FIELD INSPECTION PERSONNEL UNIT RATE Handling Charge ‐ Beams Not Broken/Hold EACH $ 50.00
ICC Special Inspector HR $ 105.00 C496 Tensile Strength, Splitting EACH $ 75.00
Soils/Asphalt Technician HR $ 105.00 C567 Unit Weight (Hardened Lightweight Concrete)EACH $ 50.00
AWS/CWI Welding Inspector HR $ 105.00 C1140 Shotcrete Panel Test EACH $ 300.00
NDT Inspector HR $ 135.00 Core Trimming (In Laboratory)EACH $ 55.00
Field/Lab Supervisor HR $ 135.00
DSA Masonry/Shotcrete Inspector HR $ 125.00 LAB TESTING ‐ ASPHALT UNIT RATE
L.A. Deputy Grading Inspector HR $ 145.00 D1188 Core Density Parafilm Coated EACH $ 85.00
L.A. City Special Inspector HR $ 145.00 D1560 Stabilometer ‐ HVEEM EACH $ 290.00
Multi‐Certified Inspector HR $ 135.00 D1561 Max Density ‐ HVEEM EACH $ 195.00
Pull l Torque Testing Technician HR $ 105.00 D2172 Asphalt Content by Solvents EACH $ 250.00
Batch Plant (Concrete or Asphalt) Technician HR $ 105.00 D3910 Wet Track Abrasion EACH $ 195.00
Firestopping Inspection HR 180.00$ D5444 Gradation of Extracted Agg EACH $ 275.00
Floor Flatness / Levelness (Inc. Equipment)DAY $ 1,500.00 D6307 Asphalt Content by Ignition EACH $ 245.00
Prestressed/Post Tensioned Inspector HR $ 105.00 D6926 Max Density ‐ Marshall EACH $ 295.00
Concrete, Masonry, Asphalt Coring or Sawing QUOTE D6927 Stability and Flow ‐ Marshall EACH $ 375.00
Travel Time HR Tech Rate T209/D2041 Theoretical Maximum Density EACH $ 150.00
Mileage MILE $ 0.58 T324 Hamburg Wheel EACH $ 1,000.00
CT 370 Moisture Content EACH $ 70.00
LAB TESTING ‐ SOIL UNIT RATE
D422 Hydrometer Analysis EACH $ 175.00 LAB TESTING ‐ MASONRY UNIT RATE
D422 Sieve Analysis of Soil EACH $ 200.00 C109 Mortar ‐ 2" Cube Compressive Strength EACH $ 40.00
D558 Soil Cement ‐ Maximum Density EACH $ 300.00 C140 Block ‐ Compressive Strength EACH $ 75.00
D559 Soil Cement ‐ Sample Preparation EACH $ 100.00 C140 Block ‐ Moisture & Absorption EACH $ 80.00
D854 Specific Gravity of Soils EACH $ 125.00 C140 Block ‐ Unit Weight & Measurements EACH $ 275.00
D1140 Materials Finer than #200 (Sieve)EACH $ 60.00 C426 Block ‐ Linear Shrinkage EACH $ 180.00
D1557 Maximum Density EACH $ 290.00 C780 Mortar ‐ (2" x 4") Cylinders Comp. Strength EACH $ 35.00
D1883 California Bearing Ratio (CBR)EACH QUOTE C1019 Grout Prisms ‐ Compressive Strength EACH $ 35.00
D2216 Soil Moisture Content by Mass EACH $ 25.00 Handling Charge (Cylinders/Cubes/Prisms) Not Broken/Holds EACH $ 75.00
D2419 Sand Equivalent EACH $ 110.00 C1314 CMU Grouted Prisms ‐ Comp. Strength (< 8" x 8" x 16")EACH $ 180.00
D2434 Permeability EACH QUOTE C1314 CMU Grouted Prisms ‐ Comp. Strength (> 8" x 8" x 16")EACH $ 245.00
D2435 Consolidation EACH $ 225.00 C67 Brick ‐ Boil EACH $ 90.00
D2435 Consolidation with Time Rate EACH $ 275.00 C67 Brick ‐ Compressive Strength EACH $ 50.00
D2844 R‐Value & Expansive Pressures 3 Points $ 250.00 C67 Brick ‐ Moisture & Absorption EACH $ 85.00
D2937 Moisture & Density (Ring Samples)EACH $ 30.00
D3080 Direct Shear EACH $ 200.00 LAB TESTING ‐ STEEL UNIT RATE
D4318 Plasticity Index of Soils EACH $ 145.00 Steel Chemical Analysis/AWS Weld:Macroetch/Fracture/Bend Test EACH QUOTE
D4829 Expansion Index of Soils EACH $ 135.00 A325 High Strength Bolt, Nut & Washer Conformance (Per Assembly) EACH 180.00$
CT 216 CA Impact Max Density EACH $ 225.00 A370 Brinell & Rockwell Hardness Test EACH $ 80.00
CT 216 CA Impact Rock Correction EACH 95.00$ A370 Nelson Stud Tensile EACH $ 195.00
A370 Rebar Bend & Tensile Test No. 11 Bar & Smaller EACH $ 45.00
LAB TESTING ‐ AGGREGATES UNIT RATE A615/706 Bend Test No. 11 Bar and Smaller EACH $ 60.00
C40 Organic Impurities in Fine Agg EACH $ 95.00 A615/706 Tensile No. 11 Bar and Smaller EACH $ 65.00
C88 Soundness by Sodium Sulfate EACH $ 315.00 A615/706 Tensile No. 14 Bar and Larger EACH QUOTE
C123 Percent Lightweight Particles EACH $ 215.00 A416 Prestressing Wire, Tension EACH $ 170.00
C127 Specific Gravity (Coarse Agg)EACH $ 130.00 Sample Preparation (Cutting)EACH $ 80.00
C128 Specific Gravity (Fine Agg)EACH $ 150.00 A416 Prestressing Cable (7 Wire) ‐ Yield & Tensile EACH $ 170.00
C131 Abrasion ‐ Los Angeles Rattler EACH $ 235.00 E605 Fireproofing Unit Weight EACH $ 60.00
C136 Sieve Analysis (Combined Agg)EACH $ 130.00
C136 Sieve Analysis (Fine or Coarse Agg)EACH $ 110.00 EQUIPMENT CHARGES UNIT RATE
C142 Clay Lumps & Friable Particles EACH $ 135.00 Air Meter DAY $ 30.00
C535 Abrasion (Large Agg) ‐ Los Angeles Rattler EACH $ 235.00 Dye Penetrant Equipment DAY $ 50.00
C566 Moisture Content by Drying EACH $ 25.00 Emissivity Test Kit EACH $ 50.00
CT 227 Cleanness Value EACH $ 230.00 Ground Rod Equipment DAY $ 50.00
D3744 Durability Index EACH $ 180.00 Jacking Assembly DAY $ 65.00
D5821 Flat & Elongated Particles EACH $ 200.00 Magnetic Particle Equipment DAY $ 50.00
T335 Crushed Particles EACH $ 170.00 Nuclear Density Gauge DAY $ 70.00
Pachometer DAY $ 55.00
LAB TESTING ‐ Misc.UNIT RATE Sand Cone Kit DAY $ 50.00
C67 Roofing Tile Absorption EACH $ 65.00 Schmidt Hammer DAY $ 45.00
C67 Roofing Tile Strength Test EACH $ 60.00 Skidmore‐Wilhelm Bolt Cell DAY $ 65.00
Torque Wrench DAY $ 50.00
Sample Pickup Charges UNIT RATE Ultrasonic Equipment DAY $ 45.00
Pick up Sample Trip Charge (4hr Minimum)HR $ 65.00 Outside Services
Weekend Sample Pick Up Charge (2hr Minimum)HR $ 80.00
MTGL Fee Schedule for Prevailing Wages July 1, 2022 - June 30, 2024
CITY OF DIAMOND BAR
Cost +20%
22 |PAGE
Minimum Field Hourly Charges Travel Charges & Mileage
For Field Technicians, Special Inspectors or any on-site (field) materials testing services:
4 hours: 4-hour minimum charge up to the first four hours of work.
8 hours: 8-hour minimum charge for over four hours of work, up to eight hours.
Project time accrued includes portal to portal travel time.
Scheduling & Cancellations
• A 24-hour notice is required when scheduling an inspection or technician.
• A two-hour show -up charge will be applied to any service canceled the same day of service.
• Verbal request will be considered authorization to perform billable work. Client shall designate
member(s) of staff who have authority to request services and notify MTGL in writing of their
authorized representative. Otherwise all service requests are billable.
Overtime Rates Laboratory Testing
• Work performed in excess of 8 hours per day and / or up to eight (8) hours on Saturdays will be
billed at 1.5 times the unit rate.
• Work performed on Sunday, recognized holidays, or in excess of eight (8) hours on Saturdays will
be billed at 2.0 times the unit rate.
• A 20% surcharge will be applied for laboratory tests performed on a Saturday or Sunday.
• Work performed by field or laboratory staff outside of normal business hours ( 5:00 AM - 5:00
PM) will be subject to the above overtime rates.
• A 2-hour minimum material sample pick-up charge with an hourly rate of $65 will be billed in
addition to the prices quoted for testing.
• Quoted laboratory test rates assume samples are free of hazardous materials. Handling and
testing of samples containing hazardous materials may include additional costs.
Administrative Charges Weekend Sample Pick-Ups
• All admintstrative costs including report distribution are billed at 5% of the monthly invoice
total.
• Certified payroll requests will have a processing fee applied for each project, billed at $ϵ5 per
payroll week.
In order to be in strict conformance with testing standards, it may be required that weekend pick-
ups be performed (e.g. concrete specimens cast on Friday must be picked up during weekend to
be in conformance with ASTM C31 requiring specimens to be moved to their final curing location
within 48 hours of casting.) Applicable charges for weekend work will apply when this is required.
Should these charges not be authorized then MTGL will not be held responsible for any negative
consequences for non-conformance .
Anticipated Costs
Terms of Payment• MTGL estimates a budget to assist the client with code required inspections and testing based
upon information provided by the client. MTGL’s ability to perform within the estimated budget
relies heavily on the accuracy of the information provided, as well as the cooperation of client’s
management staff.
• Project actual budget totals may vary. Estimated budget hours are based upon 40 hours a
week, 8 hours a day, Monday-Friday. Client shall monitor the percentage of work remaining to
assure inspections and testing is not greater than the estimated budget and adjusts the
contractor’s labor and scheduling to maintain the work completion schedule.
• Client recognizes and agrees that any “anticipated costs,” “budget estimates,” or the like that
may be prepared by MTGL are NOT “guaranteed maximums,” “lump sums;” or “not-to-exceed
totals”. Client will be invoiced for all work performed and only for work performed based on
MTGL's working conditions and hours as an attachment to their contract.
•ĚĂŝůLJƌĞƉŽƌƚĨĞĞŽĨϭͬϮŚŽƵƌǁŝůůďĞŝŶǀŽŝĐĞĚĂƚĂƉƉůŝĐĂďůĞƌĂƚĞĨŽƌĨŝĞůĚƐĞƌǀŝĐĞƐ͘
• Additionally, any weekly overtime hours, Saturday or Sunday, double shift, and/or night shift
differential for shop steel inspection are NOT included in MTGL’s proposal.
• Invoices for all services willl be submitted monthly. These invoices are due in full upon
presentation to client. Invoices outstanding over 45 days are considered past due and will be
subject to a finance charge of 1.5% of the unpaid balance each month.
• All invoice errors or necessary corrections shall be brought to the attention of MTGL within 30
days of receipt of invoice. Thereafter, customer, acknowledges invoices are correct and valid.
• MTGL reserves the right to terminate its services to a customer without notice if all invoices are
not current. Upon such termination of services, the entire amount accrued for all services
performed shall immediately become due and payable. Customer waives any and all claims
against MTGL, its subsidiaries, affiliates. servants and agents for termination of work on account of
these terms.
• In the event of any litigation arising from or related to any agreement to provide services
whether verbal or written, the prevailing party shall be entitled to recover from the non-prevailing
party all reasonable costs incurred, including staff time. court costs, attorney fees and all other
related expenses in such litigation. Additionally, in the event of a non- adjudicative settlement of
litigation between the parties or a resolution of dispute by arbitration, that same process shall
determine the prevailing party.
Reimbursable Expenses & Outside Services
• Heavy equipment, subcontractor fees and expenses, supplemental insurance, travel,
shipping, outside reproduction, and other reimbursable expenses will be invoiced at cost plus
20%.
• Outside services will be billed at cost plus 20% unless billed directly to and paid for by Client.
Please note that ĨŝĞůĚƐĞƌǀŝĐĞ rates will increase Ăƚ6йJuly 1st of 2024 for cost of living
increases.
• For projects outside a 50-mile radius from the nearest MTGL facility, $0.58 per excess mile to
and from the project will be charged for inspectors and technicians.
• When project related equipment is required to be transported to and from the project site, time
and mileage for inspectors and field technicians will be billed on a portal to portal basis.
• For all projects, $0.58 per mile rate and applicable travel time will be charged portal to portal for
engineers, consultants, and supervisors from the laboratory to the project site and return.
Our professional engineering, geology, and inspection services are performed in accordance with the current standards of practice in the industry. No other warranty or representation,
express or implied, is made or intended.
ĂƐŝƐŽĨŚĂƌŐĞƐand Contract Terms
The charges for services and General Terms and Conditions set forth below will govern the provision of services and will constitute the contract terms between the Owner or Owner’s
Representative (Client) and MTGL, Inc unless the Client and MTGL, Inc. have executed a written contract with respect to such services, in which case the terms and provisions of the written contract
shall ƐƵƉĞƌƐĞĚĞ.
23 |PAGE